Product Description
General
Drop-out fuse and pull the load drop-out fuse is outdoor high-voltage protection of electrical. It is installed in high-voltage side of the distribution transformer or the Support Link of the distribution line as Transformers and lines short circuit, overload protection, and open, co-load current. Drop-out fuse is made by the insulating bracket and fuse tubes, static contact is installed at both ends of the insulation bracket, Moving contact installed on both ends of fuse tube, Fuse tube is composed by inner arc tube and outer phenolic paper tube or epoxy glass cloth tube. Pull load drop-out fuse can enhance flexibility auxiliary contacts and arc chute for open, co-load current.
When drop-out fuse in the normal operation, the fuse tube with fuse tension to form the closed position. When the system fails, the fault current blown fuse quickly, And form of arc, arc tube by the electric arc burning, Decompose large amounts of gas, formed a high pressure in the tube, and formed vertical wind along the pipeline, The arc was quickly stretch and elongated. After fuse blows, the moving contact lose tension and turned out, locking mechanism, release fuse tube, fuse tube drop, formed breaking Position. When pull the load, use insulating rod to pull the moving contact. At this point, the moving and the static contact is still contact. Continued pull the contact with the insulating rod, the auxiliary contacts are separated. The arc appear between the auxiliary contacts, and was stretch in the hood slit, the arc cover has gas, when the current is 0, the arc goes out.
Use and Standards
This product is used in 10 ~ 35KV distribution lines branching lines and distribution transformers primary side, For overload and short circuit protection Separation and Combination the rated load current.
The product model by JB/T8321-1996Method of type AC high-voltage fuses prepared. Product parameters made by GB15166.3-1994 high voltage fuses Expulsion fusesstandards. The standards are not clearly defined the important parameters and configuration, According to JB/DQ2139-198610 ~ 35KV outdoor high voltage drop fuse interim technology requires correction.
Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device. To be connected with incoming feeder of distribution transformer or distribution lines, it mainly protect transformer or lines from short circuit and overload, and on/off loading, current. Drop-out fuse cutout is composed of insulate insulator supports and fuse tube, static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube. Fuse tube is composed of inside arc-extinguishing tube. Outer phenolic compound paper tube or epoxy glass tube, load switching fuse cutout provides enforced elastic auxiliary contacts and arc-extinguishing enclosure switching on-off loading current.
At normally working via fuse link tightened the fuse tube is fixed to form up of close position. In case system occur faults, fault current result result in fuse melt immediately and take piece electric are, which let arc-extinguishing tube being heated and explode a lot of gas, This will produce high pressure and below of the are along with tube. After fuse link melt moving contact has no tightened strength again, mechanism is locked and fuse tube drop out, Cutout now is in open position. When it needs to switch off during cutout loading, operator shall via insulating operating bar pull the moving contact, at its beginning main contact and auxiliary static contact is contacted still, Whiling pulling the auxiliary contact is separated between auxiliary contacts there occur electric arc and the arc will be lengthened in arc-extinguishing enclosure gap and meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.
Product Parameters
| Typ |
Rated Volatge (kv) |
Rated Current (A) |
Breaking current (kA) |
Impulse voltage (BIL) |
Power-frequency withstand voltage |
Leakage distance (mm) |
Weight (kg) |
| UD-1 |
12 |
100 |
6.3 |
110 |
40 |
250 |
5.8 |
| UD-1 |
12 |
200 |
8 |
110 |
40 |
250 |
5.8 |
| UD-2 |
15 |
100 |
10 |
125 |
45 |
320 |
6.9 |
| UD-2 |
15 |
200 |
12 |
125 |
45 |
320 |
6.9 |
| UD-3 |
24 |
100 |
8 |
150 |
65 |
530 |
10 |
| UD-3 |
24 |
200 |
10 |
150 |
65 |
530 |
10 |
| UD-4 |
15 |
100 |
10 |
125 |
45 |
350 |
4.15 |
| UD-4 |
15 |
200 |
12 |
125 |
45 |
350 |
4.15 |
| UD-5 |
12 |
100 |
6.3 |
110 |
40 |
250 |
6.3 |
| UD-5 |
12 |
200 |
8 |
110 |
40 |
250 |
6.3 |
| UD-6 |
15 |
100 |
10 |
125 |
45 |
320 |
10 |
| UD-6 |
15 |
200 |
12 |
125 |
45 |
320 |
10 |
| UD-7 |
24 |
100 |
8 |
150 |
65 |
540 |
10 |
| UD-7 |
24 |
200 |
10 |
150 |
65 |
540 |
10 |
| UD-7(F) |
33 |
200 |
12 |
170 |
70 |
720 |
4.4 |
| UD-8 |
33 |
100 |
10 |
170 |
70 |
720 |
11.6 |
| UD-8 |
33 |
200 |
12 |
170 |
70 |
720 |
11.6 |
Main product
Company Profile
Zhejiang ChaoTai Complete Equipment Co., Ltd. is a high-tech enterprise focused on the field of electrical integration. We have a professional R&D, production, and service team with over 15 years of industry experience.
Our main products include high-voltage solid-state soft starters, capacitor cabinets, high and low voltage switchgear, gas-insulated switchgear, and substations. Currently, our products are widely used in various fields such as energy and chemical industries, metal smelting, electric power grids, industrial manufacturing, universities and research institutions, medical and pharmaceutical sectors, municipal commerce, water conservancy and hydropower, road traffic, and commercial and residential areas.
We adhere to technological innovation and the development philosophy of "smart manufacturing," vigorously introducing high-level technical talents to comprehensively enhance the company's core competitiveness, while providing the most valuable services to our customers and striving to build the best brand in the industry. Since its establishment, the company has continuously made progress, evolving from nothing to something, and from something to excellence. We insist on innovation and follow a modern business path of survival through quality, market-oriented, development through reputation, and efficiency through management." We are committed to "technology as the guide, standardized management, excellent quality, and customer satisfaction" in our quality and technical talent management, enhancing the company's market competitiveness, and striving to serve the transmission and distribution fields of China's electric power and grid with faster, stronger, and higher goals. Integrity is fundamental, quality is paramount, service is supreme, and customer satisfaction is our eternal tenet. Pursuing excellence, continuous innovation, and puilding a trustworthy brand are the company's unwavering development goals. Your recognition is our driving force. We thank all our new and old customers for their support and affection, and Senhang Technology looks forward to working hand in hand with you to create a better future.
Our Advantages
Certifications
After Sales Service
FAQ
Q1. Are you a factory or trading company?
A.We are a factory.
Q2. Where is your factory located? How can I visit there?
A. Our factory is located in Wenzhou City, Zhejiang Province, China. You can fly to Longwan airport directly. All our clients,from home or abroad, are warmly welcome to visit us!
Q3. What's the payment term?
A. We accept TT. 30% deposit and 70% before shipment, Western Union, L/C At Sight is ok! We'll l show you the photos of the products and packages before you pay the balance.
Q4. Tell me the standard of package? What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons, If vou have leaallyl registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. Would you accept to use our logo?
A. If you have good quantity,it absolute no problem to do OEM.
Q6. How about the transport?
A. If the number of aoods is small we usually use TNT.DHL.FEDEX.EMS and some express voull offered. If the number of the goods is big usually we use the FWD you offered or we provided. Either by sea or by air is OK.
Q7. What is your Production lead time /delivery time?
A: Generally, it will take 25 to 30 days after receivina vour advance payment.
The specificl delivery time depends on the items and the quantity of your order. Silicone rubber's reqular product is 1,000/ week, Porcelain's need 2-3 weeks about 1000 pcs.
Q8. How do you make our business long-term and good relationship?
A:l. We keep aood auality and competitive price to ensure our customers benefit:
A: 2. We respect every customer as our friend and we sincerely do business and make friendsl with them, no matter where they come from.
A: 3.Most goods we have the type report according the IEC STANDARD
Q9. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q10. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q11. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q12.What certificates do you have?
A:ISO9001,OHSAS18001,ISO14001 certificate and Type test report of product.
Audited Supplier 
){kind=link}