Product Description
General
This (H)GW9 outdoor high voltage switch equipment of single phase AC 50Hz.The product is suitable for power systems with a rated voltage of 10kV to make or break power supply under circumstances of voltage and no load. The isolator adopts an isolated hook rod to operate.
Service conditions
1. The altitude does not exceed 1000m.
2. The ambient air temperature: Maximum:+40ºC; Minimum:-30ºC, Paramos:-40ºC
3. The wind pressure does not exceed 700Pa. (corresponding to 34m/s wind speed).
4. The earthquake intensity does not exceed 8 degrees.
5. The working situation hasn't frequent violent vibration.
6. The installation site of an ordinary type isolator should be kept away from gas, smoke chemical deposition,salt-spray fog, dust, and other explosive and corrosive matters that affect seriously the insulation and conduction capability of the isolator.
7. Pollution-proof type isolator is applied to severe filthy conduction area; however, it shouldn't be any explosive matters and matters causing a fire.
Scope
Type IST off-load switchs are suitable for use in tropical zone, with a maximum ambient temperature of approximately 40 degrees Centigrade and an average temperature of approximately 28 degrees Centigrade with high humidity and heavy rainfall. The preferred operational altitude is up to 1800 m above sea level.
Electrical System
Type IST off-load isolator switch are designed for continuous operation on a 3-phase 3-wire 11, 15,22,24,27and 33,36kV,50/60Hz distribution system with the star-point of the source-point transformer earthed through an Arc Suppression Coil or Earthing Resistor.
Standards
Type IST off-load isolator switch are complied with relevant requirements of the following standards together with all current amendments;
IEC62271-102:2003 :High-voltage alternating-current disconnectors and earthing switches
IEC60129:1984 :Alternating current disconnectors and earth switches
IEC 60265-1:1998 :High voltage switches - Part 1:Switches for rated
voltage above 1kV and less than 52kV
IEC 60694: 1996 :Common specifications for high-voltage switchgear and
controlgear standards
IEC 60815:1986 :Guide for the selection of insulators in respect of
polluted conditions
BS EN ISO 1461 :Hot dip galvanized coatings on fabricated iron and
steel articles- Specifications and test methods
| project |
unit |
parameter |
| Rated voltage |
|
|
kV |
40.5 |
72.5 |
126 |
| Rated insulation level |
a) 1min power frequency withstand voltage (effective value) |
groundground |
kV |
95 |
140 |
230 |
| |
|
FRACTURE |
kV |
115 |
160 |
245 |
| |
b) Rated lightning impulse withstand voltage (peak) |
groundgroun |
kV |
185 |
325 |
550 |
| |
|
FRACTURE |
kV |
215 |
375 |
630 |
| Rated frequency |
|
Hz |
50 |
| Rated current |
|
|
A |
630 |
1250 |
1600 |
2000 |
| Rated short-term withstand current |
|
|
KA |
20 |
31.5 |
40 |
40 |
| Rated peak withstand current |
|
|
KA |
50 |
80 |
100 |
100 |
| Rated short-circuit duration dominant/ground switch |
|
|
5 |
April 2nd |
| Rated terminal mechanical load |
Horizontal longitudinal load |
N |
750 |
1000 |
| |
Horizontal lateral load |
N |
500 |
750 |
| |
Vertical force |
N |
750 |
1000 |
| Creepage distance |
mm |
1013/1256 |
1813/2248 |
3150/3906 |
| Mechanical lifespan |
second |
200 |
| Human operation mechanism |
model |
|
CS17 , CS17G |
| |
Control circuit voltage |
V |
AC220,00110 , DC220 |
| Electric operating mechanism |
model |
|
q6 |
| |
Motor voltage |
V |
AC220 , AC380 , DC220 |
| |
Control circuit voltage |
V |
AC220 , AC380 , DC220 |
| |
Opening and closing time |
5 |
6±1 |
| Product weight |
Ungrounded |
kg |
360 |
500 |
800 |
| |
Single grounding |
|
390 |
560 |
900 |
| |
Double grounding |
kg |
430 |
620 |
1000 |
Main product
Company Profile
Zhejiang ChaoTai Complete Equipment Co., Ltd. is a high-tech enterprise focused on the field of electrical integration. We have a professional R&D, production, and service team with over 15 years of industry experience.
Our main products include high-voltage solid-state soft starters, capacitor cabinets, high and low voltage switchgear, gas-insulated switchgear, and substations. Currently, our products are widely used in various fields such as energy and chemical industries, metal smelting, electric power grids, industrial manufacturing, universities and research institutions, medical and pharmaceutical sectors, municipal commerce, water conservancy and hydropower, road traffic, and commercial and residential areas.
We adhere to technological innovation and the development philosophy of "smart manufacturing," vigorously introducing high-level technical talents to comprehensively enhance the company's core competitiveness, while providing the most valuable services to our customers and striving to build the best brand in the industry. Since its establishment, the company has continuously made progress, evolving from nothing to something, and from something to excellence. We insist on innovation and follow a modern business path of survival through quality, market-oriented, development through reputation, and efficiency through management." We are committed to "technology as the guide, standardized management, excellent quality, and customer satisfaction" in our quality and technical talent management, enhancing the company's market competitiveness, and striving to serve the transmission and distribution fields of China's electric power and grid with faster, stronger, and higher goals. Integrity is fundamental, quality is paramount, service is supreme, and customer satisfaction is our eternal tenet. Pursuing excellence, continuous innovation, and puilding a trustworthy brand are the company's unwavering development goals. Your recognition is our driving force. We thank all our new and old customers for their support and affection, and Senhang Technology looks forward to working hand in hand with you to create a better future.
Our Advantages
Certifications
After Sales Service
Packaging & Shipping
FAQ
Q1. Are you a factory or trading company?
A.We are a factory.
Q2. Where is your factory located? How can I visit there?
A. Our factory is located in Wenzhou City, Zhejiang Province, China. You can fly to Longwan airport directly. All our clients,from home or abroad, are warmly welcome to visit us!
Q3. What's the payment term?
A. We accept TT. 30% deposit and 70% before shipment, Western Union, L/C At Sight is ok! We'll l show you the photos of the products and packages before you pay the balance.
Q4. Tell me the standard of package? What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons, If vou have leaallyl registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q5. Would you accept to use our logo?
A. If you have good quantity,it absolute no problem to do OEM.
Q6. How about the transport?
A. If the number of aoods is small we usually use TNT.DHL.FEDEX.EMS and some express voull offered. If the number of the goods is big usually we use the FWD you offered or we provided. Either by sea or by air is OK.
Q7. What is your Production lead time /delivery time?
A: Generally, it will take 25 to 30 days after receivina vour advance payment.
The specificl delivery time depends on the items and the quantity of your order. Silicone rubber's reqular product is 1,000/ week, Porcelain's need 2-3 weeks about 1000 pcs.
Q8. How do you make our business long-term and good relationship?
A:l. We keep aood auality and competitive price to ensure our customers benefit:
A: 2. We respect every customer as our friend and we sincerely do business and make friendsl with them, no matter where they come from.
A: 3.Most goods we have the type report according the IEC STANDARD
Q9. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q10. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q11. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q12.What certificates do you have?
A:ISO9001,OHSAS18001,ISO14001 certificate and Type test report of product.
Audited Supplier 
){kind=link}